Miniature bearings heating Precautions

Miniature bearings in addition to being heated and cooling, the internal friction of the bearing operating temperature also play a big role in the decision. Low friction bearings: radial load deep groove ball bearings, miniature row angular contact ball bearings and cylindrical roller with cage Bearings. Contact sealed bearings, full complement cylindrical roller bearings and thrust roller bearings will have a greater friction. Heating miniature bearings precautions are:
1, the yoke placed on the end face of the host.
2, insert the plug into a power outlet control switch on.
3. Check the grounding line is good, after the energizing test pencil test.
4, press the start button, the host power.
5, check the yoke on the ground should be no voltage.
6, press the stop button Host powered off, stop heating.
7, depending on the specifications of miniature bearings or other workpieces, choose a different yoke put, this yoke on the top surface of the host, should fit flat.
8, when heated miniature bearings, sensors should be inserted into the "sensor socket" and the sensor close to the workpiece is heated.