2015年2月7日星期六

Waffle radial sliding bearing

Radial sliding bearing has three kinds of typical structure, respectively is the waffle radial sliding bearing, the radial sliding bearing and  self-aligning radial sliding bearing.

  Waffle sliding bearing is composed of a bearing seat,  bearing cover, split bearing and stud etc.. Subdivision surface often artist stepped, in order to prevent lateral dislocation of neutralization. The bearing cover is arranged at the upper part of the threaded hole, for the installation of the oil cup. Bush is split, usually loaded by the lower bearing shell bearing .

  In order to save precious metals or other needs, often cast a layer of bearing liner  on the inner surface of  the bush . In the bearing inner wall of non load bearing area open oil tank.Oil through the oil hole and an oil slot into the bearing clearance.

  Bearing section  and the load direction had better approximately vertical,though most bearing subdivision surface is horizontal (also made into inclined).

 
Waffle radial sliding bearing assembly and disassembly is convenient, and the bearing wear can adjust bearing clearance with the gasket thickness of reducing the split surface .

没有评论:

发表评论