Design features and classification of thin wall bearing

High precision thin section bearing  very quiet and strong carrying capacity. These ball bearings, there are three design, and extremely small, most of the cross-section is square. In these series, even larger shaft diameters and bearing bore, the cross-section remains unchanged. These bearings are therefore called constant section. It is this characteristic of the standard iso series with the thin-walled rings bearing conventional bearing distinguished. Therefore, a larger cross-section can be selected using a stronger bearing carrying capacity without changing the shaft diameter. Thin wall bearing rings can be designed to require very little space is extremely light and bearings.
Thin wall bearing rings can be deep groove ball bearings, four point contact bearings, thin section angular contact bearings  In different series are provided over a variety of designs. Series depends on the cross-sectional size. Match ball with the series.
Deep groove ball bearings can support bi-directional axial load and radial load.
Four point contact bearings can support axial loads in both directions as well as radial loads; therefore they are in contact with the double row angular ball bearings running the same way.
Angular contact ball bearings can match the optimal number of balls and the contact angle of 30 °. They support radial loads than deep groove ball bearings or four point contact bearing higher, and can support axial loads from the same direction. For special needs, angular contact ball bearings are also available as matched bearings provide. Therefore, these combinations of stiffness and load capacity than a single bearing products to be much higher.