2014年10月21日星期二

LYHY slewing ring bearings Angular contact ball bearings

Angular contact ball bearings: 7000C-type (α = 15 °), 7000AC type (α = 25 °) and 7000B (α = 40 °) of several types. This kind of bearing lock port on the outer ring, the inner and outer rings can not be separated in general, can withstand radial and axial joint load and axial load in one direction. Axial load capacity mobile crane bearing from the contact angle, the contact angle is larger, the ability to withstand high axial loads. This kind of bearing can limit the axial displacement in one direction shaft or housing.
Higher speed limit contact ball bearings can support radial load and axial load can also be subject to pure axial load, axial load capacity by the contact angle and the contact angle increases with the increase.
Single row angular contact ball bearings
Single row angular contact ball bearings can withstand axial load in one direction, when the radial load, will cause additional axial force must be applied to the corresponding reverse load, miniature linear bearings therefore, the kinds of bearings are generally used in pairs. Double row angular contact ball bearings can withstand greater radial load mainly radial and axial joint load and moment loads, it can limit the bi-axial displacement of shaft or housing.

没有评论:

发表评论